The HTTP Connector

Table of Contents

Introduction

The HTTP Connector element represents a Connector component that supports the HTTP/1.1 protocol. It enables Catalina to function as a stand-alone web server, in addition to its ability to execute servlets and JSP pages. A particular instance of this component listens for connections on a specific TCP port number on the server. One or more such Connectors can be configured as part of a single Service, each forwarding to the associated Engine to perform request processing and create the response.

If you wish to configure the Connector that is used for connections to web servers using the AJP protocol (such as the mod_jk 1.2.x connector for Apache 1.3), please refer to the AJP Connector documentation.

Each incoming request requires a thread for the duration of that request. If more simultaneous requests are received than can be handled by the currently available request processing threads, additional threads will be created up to the configured maximum (the value of the maxThreads attribute). If still more simultaneous requests are received, they are stacked up inside the server socket created by the Connector, up to the configured maximum (the value of the acceptCount attribute). Any further simultaneous requests will receive "connection refused" errors, until resources are available to process them.

Attributes

Common Attributes

All implementations of Connector support the following attributes:

Attribute Description
allowTrace

A boolean value which can be used to enable or disable the TRACE HTTP method. If not specified, this attribute is set to false.

asyncTimeout

The default timeout for asynchronous requests in milliseconds. If not specified, this attribute is set to the Servlet specification default of 30000 (30 seconds).

defaultSSLHostConfigName

The name of the default SSLHostConfig that will be used for secure connections (if this connector is configured for secure connections) if the client connection does not provide SNI or if the SNI is provided but does not match any configured SSLHostConfig. If not specified the default value of _default_ will be used.

enableLookups

Set to true if you want calls to request.getRemoteHost() to perform DNS lookups in order to return the actual host name of the remote client. Set to false to skip the DNS lookup and return the IP address in String form instead (thereby improving performance). By default, DNS lookups are disabled.

maxHeaderCount

The maximum number of headers in a request that are allowed by the container. A request that contains more headers than the specified limit will be rejected. A value of less than 0 means no limit. If not specified, a default of 100 is used.

maxParameterCount

The maximum number of parameter and value pairs (GET plus POST) which will be automatically parsed by the container. Parameter and value pairs beyond this limit will be ignored. A value of less than 0 means no limit. If not specified, a default of 10000 is used. Note that FailedRequestFilter filter can be used to reject requests that hit the limit.

maxPostSize

The maximum size in bytes of the POST which will be handled by the container FORM URL parameter parsing. The limit can be disabled by setting this attribute to a value less than zero. If not specified, this attribute is set to 2097152 (2 megabytes). Note that the FailedRequestFilter can be used to reject requests that exceed this limit.

maxSavePostSize

The maximum size in bytes of the POST which will be saved/buffered by the container during FORM or CLIENT-CERT authentication. For both types of authentication, the POST will be saved/buffered before the user is authenticated. For CLIENT-CERT authentication, the POST is buffered for the duration of the SSL handshake and the buffer emptied when the request is processed. For FORM authentication the POST is saved whilst the user is re-directed to the login form and is retained until the user successfully authenticates or the session associated with the authentication request expires. The limit can be disabled by setting this attribute to -1. Setting the attribute to zero will disable the saving of POST data during authentication. If not specified, this attribute is set to 4096 (4 kilobytes).

parseBodyMethods

A comma-separated list of HTTP methods for which request bodies will be parsed for request parameters identically to POST. This is useful in RESTful applications that want to support POST-style semantics for PUT requests. Note that any setting other than POST causes Tomcat to behave in a way that goes against the intent of the servlet specification. The HTTP method TRACE is specifically forbidden here in accordance with the HTTP specification. The default is POST

port

The TCP port number on which this Connector will create a server socket and await incoming connections. Your operating system will allow only one server application to listen to a particular port number on a particular IP address. If the special value of 0 (zero) is used, then Tomcat will select a free port at random to use for this connector. This is typically only useful in embedded and testing applications.

protocol

Sets the protocol to handle incoming traffic. The default value is HTTP/1.1 which uses an auto-switching mechanism to select either a Java NIO based connector or an APR/native based connector. If the PATH (Windows) or LD_LIBRARY_PATH (on most unix systems) environment variables contain the Tomcat native library, and the AprLifecycleListener that is used to initialize APR has its useAprConnector attribute set to true, the APR/native connector will be used. If the native library cannot be found or the attribute is not configured, the Java NIO based connector will be used. Note that the APR/native connector has different settings for HTTPS than the Java connectors.
To use an explicit protocol rather than rely on the auto-switching mechanism described above, the following values may be used:
org.apache.coyote.http11.Http11NioProtocol - non blocking Java NIO connector
org.apache.coyote.http11.Http11Nio2Protocol - non blocking Java NIO2 connector
org.apache.coyote.http11.Http11AprProtocol - the APR/native connector.
Custom implementations may also be used.
Take a look at our Connector Comparison chart. The configuration for both Java connectors is identical, for http and https.
For more information on the APR connector and APR specific SSL settings please visit the APR documentation

proxyName

If this Connector is being used in a proxy configuration, configure this attribute to specify the server name to be returned for calls to request.getServerName(). See Proxy Support for more information.

proxyPort

If this Connector is being used in a proxy configuration, configure this attribute to specify the server port to be returned for calls to request.getServerPort(). See Proxy Support for more information.

redirectPort

If this Connector is supporting non-SSL requests, and a request is received for which a matching <security-constraint> requires SSL transport, Catalina will automatically redirect the request to the port number specified here.

scheme

Set this attribute to the name of the protocol you wish to have returned by calls to request.getScheme(). For example, you would set this attribute to "https" for an SSL Connector. The default value is "http".

secure

Set this attribute to true if you wish to have calls to request.isSecure() to return true for requests received by this Connector. You would want this on an SSL Connector or a non SSL connector that is receiving data from a SSL accelerator, like a crypto card, a SSL appliance or even a webserver. The default value is false.

URIEncoding

This specifies the character encoding used to decode the URI bytes, after %xx decoding the URL. If not specified, UTF-8 will be used unless the org.apache.catalina.STRICT_SERVLET_COMPLIANCE system property is set to true in which case ISO-8859-1 will be used.

useBodyEncodingForURI

This specifies if the encoding specified in contentType should be used for URI query parameters, instead of using the URIEncoding. This setting is present for compatibility with Tomcat 4.1.x, where the encoding specified in the contentType, or explicitly set using Request.setCharacterEncoding method was also used for the parameters from the URL. The default value is false.

Notes: 1) This setting is applied only to the query string of a request. Unlike URIEncoding it does not affect the path portion of a request URI. 2) If request character encoding is not known (is not provided by a browser and is not set by SetCharacterEncodingFilter or a similar filter using Request.setCharacterEncoding method), the default encoding is always "ISO-8859-1". The URIEncoding setting has no effect on this default.

useIPVHosts

Set this attribute to true to cause Tomcat to use the IP address that the request was received on to determine the Host to send the request to. The default value is false.

xpoweredBy

Set this attribute to true to cause Tomcat to advertise support for the Servlet specification using the header recommended in the specification. The default value is false.

Standard Implementation

The standard HTTP connectors (NIO, NIO2 and APR/native) all support the following attributes in addition to the common Connector attributes listed above.

Attribute Description
acceptCount

The maximum queue length for incoming connection requests when all possible request processing threads are in use. Any requests received when the queue is full will be refused. The default value is 100.

acceptorThreadCount

The number of threads to be used to accept connections. Increase this value on a multi CPU machine, although you would never really need more than 2. Also, with a lot of non keep alive connections, you might want to increase this value as well. Default value is 1.

acceptorThreadPriority

The priority of the acceptor threads. The threads used to accept new connections. The default value is 5 (the value of the java.lang.Thread.NORM_PRIORITY constant). See the JavaDoc for the java.lang.Thread class for more details on what this priority means.

address

For servers with more than one IP address, this attribute specifies which address will be used for listening on the specified port. By default, this port will be used on all IP addresses associated with the server.

allowedTrailerHeaders

By default Tomcat will ignore all trailer headers when processing chunked input. For a header to be processed, it must be added to this comma-separated list of header names.

bindOnInit

Controls when the socket used by the connector is bound. By default it is bound when the connector is initiated and unbound when the connector is destroyed. If set to false, the socket will be bound when the connector is started and unbound when it is stopped.

clientCertProvider

When client certificate information is presented in a form other than instances of java.security.cert.X509Certificate it needs to be converted before it can be used and this property controls which JSSE provider is used to perform the conversion. For example it is used with the AJP connectors, the HTTP APR connector and with the org.apache.catalina.valves.SSLValve. If not specified, the default provider will be used.

compressableMimeType

The value is a comma separated list of MIME types for which HTTP compression may be used. The default value is text/html,text/xml,text/plain,text/css,text/javascript,application/javascript .

compression

The Connector may use HTTP/1.1 GZIP compression in an attempt to save server bandwidth. The acceptable values for the parameter is "off" (disable compression), "on" (allow compression, which causes text data to be compressed), "force" (forces compression in all cases), or a numerical integer value (which is equivalent to "on", but specifies the minimum amount of data before the output is compressed). If the content-length is not known and compression is set to "on" or more aggressive, the output will also be compressed. If not specified, this attribute is set to "off".

Note: There is a tradeoff between using compression (saving your bandwidth) and using the sendfile feature (saving your CPU cycles). If the connector supports the sendfile feature, e.g. the NIO connector, using sendfile will take precedence over compression. The symptoms will be that static files greater that 48 Kb will be sent uncompressed. You can turn off sendfile by setting useSendfile attribute of the connector, as documented below, or change the sendfile usage threshold in the configuration of the DefaultServlet in the default conf/web.xml or in the web.xml of your web application.

compressionMinSize

If compression is set to "on" then this attribute may be used to specify the minimum amount of data before the output is compressed. If not specified, this attribute is defaults to "2048".

connectionLinger

The number of seconds during which the sockets used by this Connector will linger when they are closed. The default value is -1 which disables socket linger.

connectionTimeout

The number of milliseconds this Connector will wait, after accepting a connection, for the request URI line to be presented. Use a value of -1 to indicate no (i.e. infinite) timeout. The default value is 60000 (i.e. 60 seconds) but note that the standard server.xml that ships with Tomcat sets this to 20000 (i.e. 20 seconds). Unless disableUploadTimeout is set to false, this timeout will also be used when reading the request body (if any).

connectionUploadTimeout

Specifies the timeout, in milliseconds, to use while a data upload is in progress. This only takes effect if disableUploadTimeout is set to false.

disableUploadTimeout

This flag allows the servlet container to use a different, usually longer connection timeout during data upload. If not specified, this attribute is set to true which disables this longer timeout.

executor

A reference to the name in an Executor element. If this attribute is set, and the named executor exists, the connector will use the executor, and all the other thread attributes will be ignored. Note that if a shared executor is not specified for a connector then the connector will use a private, internal executor to provide the thread pool.

executorTerminationTimeoutMillis

The time that the private internal executor will wait for request processing threads to terminate before continuing with the process of stopping the connector. If not set, the default is 5000 (5 seconds).

keepAliveTimeout

The number of milliseconds this Connector will wait for another HTTP request before closing the connection. The default value is to use the value that has been set for the connectionTimeout attribute. Use a value of -1 to indicate no (i.e. infinite) timeout.

maxConnections

The maximum number of connections that the server will accept and process at any given time. When this number has been reached, the server will accept, but not process, one further connection. This additional connection be blocked until the number of connections being processed falls below maxConnections at which point the server will start accepting and processing new connections again. Note that once the limit has been reached, the operating system may still accept connections based on the acceptCount setting. The default value varies by connector type. For NIO and NIO2 the default is 10000. For APR/native, the default is 8192.

Note that for APR/native on Windows, the configured value will be reduced to the highest multiple of 1024 that is less than or equal to maxConnections. This is done for performance reasons.
If set to a value of -1, the maxConnections feature is disabled and connections are not counted.

maxExtensionSize

Limits the total length of chunk extensions in chunked HTTP requests. If the value is -1, no limit will be imposed. If not specified, the default value of 8192 will be used.

maxHttpHeaderSize

The maximum size of the request and response HTTP header, specified in bytes. If not specified, this attribute is set to 8192 (8 KB).

maxKeepAliveRequests

The maximum number of HTTP requests which can be pipelined until the connection is closed by the server. Setting this attribute to 1 will disable HTTP/1.0 keep-alive, as well as HTTP/1.1 keep-alive and pipelining. Setting this to -1 will allow an unlimited amount of pipelined or keep-alive HTTP requests. If not specified, this attribute is set to 100.

maxSwallowSize

The maximum number of request body bytes (excluding transfer encoding overhead) that will be swallowed by Tomcat for an aborted upload. An aborted upload is when Tomcat knows that the request body is going to be ignored but the client still sends it. If Tomcat does not swallow the body the client is unlikely to see the response. If not specified the default of 2097152 (2 megabytes) will be used. A value of less than zero indicates that no limit should be enforced.

maxThreads

The maximum number of request processing threads to be created by this Connector, which therefore determines the maximum number of simultaneous requests that can be handled. If not specified, this attribute is set to 200. If an executor is associated with this connector, this attribute is ignored as the connector will execute tasks using the executor rather than an internal thread pool.

maxTrailerSize

Limits the total length of trailing headers in the last chunk of a chunked HTTP request. If the value is -1, no limit will be imposed. If not specified, the default value of 8192 will be used.

minSpareThreads

The minimum number of threads always kept running. If not specified, the default of 10 is used.

noCompressionUserAgents

The value is a regular expression (using java.util.regex) matching the user-agent header of HTTP clients for which compression should not be used, because these clients, although they do advertise support for the feature, have a broken implementation. The default value is an empty String (regexp matching disabled).

processorCache

The protocol handler caches Processor objects to speed up performance. This setting dictates how many of these objects get cached. -1 means unlimited, default is 200. If not using Servlet 3.0 asynchronous processing, a good default is to use the same as the maxThreads setting. If using Servlet 3.0 asynchronous processing, a good default is to use the larger of maxThreads and the maximum number of expected concurrent requests (synchronous and asynchronous).

restrictedUserAgents

The value is a regular expression (using java.util.regex) matching the user-agent header of HTTP clients for which HTTP/1.1 or HTTP/1.0 keep alive should not be used, even if the clients advertise support for these features. The default value is an empty String (regexp matching disabled).

server

Overrides the Server header for the http response. If set, the value for this attribute overrides the Tomcat default and any Server header set by a web application. If not set, any value specified by the application is used. If the application does not specify a value then Apache-Coyote/1.1 is used. Unless you are paranoid, you won't need this feature.

SSLEnabled

Use this attribute to enable SSL traffic on a connector. To turn on SSL handshake/encryption/decryption on a connector set this value to true. The default value is false. When turning this value true you will want to set the scheme and the secure attributes as well to pass the correct request.getScheme() and request.isSecure() values to the servlets See SSL Support for more information.

tcpNoDelay

If set to true, the TCP_NO_DELAY option will be set on the server socket, which improves performance under most circumstances. This is set to true by default.

threadPriority

The priority of the request processing threads within the JVM. The default value is 5 (the value of the java.lang.Thread.NORM_PRIORITY constant). See the JavaDoc for the java.lang.Thread class for more details on what this priority means.

Java TCP socket attributes

The NIO and NIO2 implementation support the following Java TCP socket attributes in addition to the common Connector and HTTP attributes listed above.

Attribute Description
socket.rxBufSize

(int)The socket receive buffer (SO_RCVBUF) size in bytes. JVM default used if not set.

socket.txBufSize

(int)The socket send buffer (SO_SNDBUF) size in bytes. JVM default used if not set.

socket.tcpNoDelay

(bool)This is equivalent to standard attribute tcpNoDelay.

socket.soKeepAlive

(bool)Boolean value for the socket's keep alive setting (SO_KEEPALIVE). JVM default used if not set.

socket.ooBInline

(bool)Boolean value for the socket OOBINLINE setting. JVM default used if not set.

socket.soReuseAddress

(bool)Boolean value for the sockets reuse address option (SO_REUSEADDR). JVM default used if not set.

socket.soLingerOn

(bool)Boolean value for the sockets so linger option (SO_LINGER). A value for the standard attribute connectionLinger that is >=0 is equivalent to setting this to true. A value for the standard attribute connectionLinger that is <0 is equivalent to setting this to false. Both this attribute and soLingerTime must be set else the JVM defaults will be used for both.

socket.soLingerTime

(int)Value in seconds for the sockets so linger option (SO_LINGER). This is equivalent to standard attribute connectionLinger. Both this attribute and soLingerOn must be set else the JVM defaults will be used for both.

socket.soTimeout

This is equivalent to standard attribute connectionTimeout.

socket.performanceConnectionTime

(int)The first value for the performance settings. See Socket Performance Options. All three performance attributes must be set else the JVM defaults will be used for all three.

socket.performanceLatency

(int)The second value for the performance settings. See Socket Performance Options. All three performance attributes must be set else the JVM defaults will be used for all three.

socket.performanceBandwidth

(int)The third value for the performance settings. See Socket Performance Options. All three performance attributes must be set else the JVM defaults will be used for all three.

socket.unlockTimeout

(int) The timeout for a socket unlock. When a connector is stopped, it will try to release the acceptor thread by opening a connector to itself. The default value is 250 and the value is in milliseconds

NIO specific configuration

The following attributes are specific to the NIO connector.

Attribute Description
pollerThreadCount

(int)The number of threads to be used to run for the polling events. Default value is 1 per processor but not more than 2.
When accepting a socket, the operating system holds a global lock. So the benefit of going above 2 threads diminishes rapidly. Having more than one thread is for system that need to accept connections very rapidly. However usually just increasing acceptCount will solve that problem. Increasing this value may also be beneficial when a large amount of send file operations are going on.

pollerThreadPriority

(int)The priority of the poller threads. The default value is 5 (the value of the java.lang.Thread.NORM_PRIORITY constant). See the JavaDoc for the java.lang.Thread class for more details on what this priority means.

selectorTimeout

(int)The time in milliseconds to timeout on a select() for the poller. This value is important, since connection clean up is done on the same thread, so do not set this value to an extremely high one. The default value is 1000 milliseconds.

useSendfile

(bool)Use this attribute to enable or disable sendfile capability. The default value is true. Note that the use of sendfile will disable any compression that Tomcat may otherwise have performed on the response.

socket.directBuffer

(bool)Boolean value, whether to use direct ByteBuffers or java mapped ByteBuffers. Default is false.
When you are using direct buffers, make sure you allocate the appropriate amount of memory for the direct memory space. On Sun's JDK that would be something like -XX:MaxDirectMemorySize=256m.

socket.appReadBufSize

(int)Each connection that is opened up in Tomcat get associated with a read ByteBuffer. This attribute controls the size of this buffer. By default this read buffer is sized at 8192 bytes. For lower concurrency, you can increase this to buffer more data. For an extreme amount of keep alive connections, decrease this number or increase your heap size.

socket.appWriteBufSize

(int)Each connection that is opened up in Tomcat get associated with a write ByteBuffer. This attribute controls the size of this buffer. By default this write buffer is sized at 8192 bytes. For low concurrency you can increase this to buffer more response data. For an extreme amount of keep alive connections, decrease this number or increase your heap size.
The default value here is pretty low, you should up it if you are not dealing with tens of thousands concurrent connections.

socket.bufferPool

(int)The NIO connector uses a class called NioChannel that holds elements linked to a socket. To reduce garbage collection, the NIO connector caches these channel objects. This value specifies the size of this cache. The default value is 500, and represents that the cache will hold 500 NioChannel objects. Other values are -1 for unlimited cache and 0 for no cache.

socket.bufferPoolSize

(int)The NioChannel pool can also be size based, not used object based. The size is calculated as follows:
NioChannel buffer size = read buffer size + write buffer size
SecureNioChannel buffer size = application read buffer size + application write buffer size + network read buffer size + network write buffer size
The value is in bytes, the default value is 1024*1024*100 (100MB).

socket.processorCache

(int)Tomcat will cache SocketProcessor objects to reduce garbage collection. The integer value specifies how many objects to keep in the cache at most. The default is 500. Other values are -1 for unlimited cache and 0 for no cache.

socket.keyCache

(int)Tomcat will cache KeyAttachment objects to reduce garbage collection. The integer value specifies how many objects to keep in the cache at most. The default is 500. Other values are -1 for unlimited cache and 0 for no cache.

socket.eventCache

(int)Tomcat will cache PollerEvent objects to reduce garbage collection. The integer value specifies how many objects to keep in the cache at most. The default is 500. Other values are -1 for unlimited cache and 0 for no cache.

selectorPool.maxSelectors

(int)The max selectors to be used in the pool, to reduce selector contention. Use this option when the command line org.apache.tomcat.util.net.NioSelectorShared value is set to false. Default value is 200.

selectorPool.maxSpareSelectors

(int)The max spare selectors to be used in the pool, to reduce selector contention. When a selector is returned to the pool, the system can decide to keep it or let it be GC'd. Use this option when the command line org.apache.tomcat.util.net.NioSelectorShared value is set to false. Default value is -1 (unlimited).

command-line-options

The following command line options are available for the NIO connector:
-Dorg.apache.tomcat.util.net.NioSelectorShared=true|false - default is true. Set this value to false if you wish to use a selector for each thread. When you set it to false, you can control the size of the pool of selectors by using the selectorPool.maxSelectors attribute.

NIO2 specific configuration

The following attributes are specific to the NIO2 connector.

Attribute Description
useSendfile

(bool)Use this attribute to enable or disable sendfile capability. The default value is true. Note that the use of sendfile will disable any compression that Tomcat may otherwise have performed on the response.

socket.directBuffer

(bool)Boolean value, whether to use direct ByteBuffers or java mapped ByteBuffers. Default is false.
When you are using direct buffers, make sure you allocate the appropriate amount of memory for the direct memory space. On Sun's JDK that would be something like -XX:MaxDirectMemorySize=256m.

socket.directSslBuffer

(bool)Boolean value, whether to use direct ByteBuffers or java mapped ByteBuffers for the SSL buffers. If true then java.nio.ByteBuffer.allocateDirect() is used to allocate the buffers, if false then java.nio.ByteBuffer.allocate() is used. The default value is false.
When you are using direct buffers, make sure you allocate the appropriate amount of memory for the direct memory space. On Oracle's JDK that would be something like -XX:MaxDirectMemorySize=256m.

socket.appReadBufSize

(int)Each connection that is opened up in Tomcat get associated with a read ByteBuffer. This attribute controls the size of this buffer. By default this read buffer is sized at 8192 bytes. For lower concurrency, you can increase this to buffer more data. For an extreme amount of keep alive connections, decrease this number or increase your heap size.

socket.appWriteBufSize

(int)Each connection that is opened up in Tomcat get associated with a write ByteBuffer. This attribute controls the size of this buffer. By default this write buffer is sized at 8192 bytes. For low concurrency you can increase this to buffer more response data. For an extreme amount of keep alive connections, decrease this number or increase your heap size.
The default value here is pretty low, you should up it if you are not dealing with tens of thousands concurrent connections.

socket.bufferPool

(int)The NIO2 connector uses a class called Nio2Channel that holds elements linked to a socket. To reduce garbage collection, the NIO2 connector caches these channel objects. This value specifies the size of this cache. The default value is 500, and represents that the cache will hold 500 Nio2Channel objects. Other values are -1 for unlimited cache and 0 for no cache.

socket.processorCache

(int)Tomcat will cache SocketProcessor objects to reduce garbage collection. The integer value specifies how many objects to keep in the cache at most. The default is 500. Other values are -1 for unlimited cache and 0 for no cache.

APR/native specific configuration

The following attributes are specific to the APR/native connector.

Attribute Description
deferAccept

Sets the TCP_DEFER_ACCEPT flag on the listening socket for this connector. The default value is true where TCP_DEFER_ACCEPT is supported by the operating system, otherwise it is false.

pollerThreadCount

Number of threads used to poll kept alive connections. On Windows the default is chosen so that the sockets managed by each thread is less than 1024. For Linux the default is 1. Changing the default on Windows is likely to have a negative performance impact.

pollTime

Duration of a poll call in microseconds. Lowering this value will slightly decrease latency of connections being kept alive in some cases, but will use more CPU as more poll calls are being made. The default value is 2000 (2ms).

sendfileSize

Amount of sockets that the poller responsible for sending static files asynchronously can hold at a given time. Extra connections will be closed right away without any data being sent (resulting in a zero length file on the client side). Note that in most cases, sendfile is a call that will return right away (being taken care of "synchronously" by the kernel), and the sendfile poller will not be used, so the amount of static files which can be sent concurrently is much larger than the specified amount. The default value is 1024.

threadPriority

(int)The priority of the acceptor and poller threads. The default value is 5 (the value of the java.lang.Thread.NORM_PRIORITY constant). See the JavaDoc for the java.lang.Thread class for more details on what this priority means.

useSendfile

(bool)Use this attribute to enable or disable sendfile capability. The default value is true. Note that the use of sendfile will disable any compression that Tomcat may otherwise have performed on the response.

Nested Components

Starting with Tomcat 9, Tomcat supports Server Name Indication (SNI). This allows multiple SSL configurations to be associated with a single secure connector with the configuration used for any given connection determined by the host name requested by the client. To facilitate this, Tomcat 9 added the SSLHostConfig element which can be used to define one of these configurations. Any number of SSLHostConfig may be nested in a Connector. Tomcat 9 also adds support for multiple certificates to be associated with a single SSLHostConfig. Each SSL certificate is therefore configured in a Certificate element with in an SSLHostConfig. For further information, see the SSL Support section below.

Special Features

HTTP/1.1 and HTTP/1.0 Support

This Connector supports all of the required features of the HTTP/1.1 protocol, as described in RFC 2616, including persistent connections, pipelining, expectations and chunked encoding. If the client (typically a browser) supports only HTTP/1.0, the Connector will gracefully fall back to supporting this protocol as well. No special configuration is required to enable this support. The Connector also supports HTTP/1.0 keep-alive.

RFC 2616 requires that HTTP servers always begin their responses with the highest HTTP version that they claim to support. Therefore, this Connector will always return HTTP/1.1 at the beginning of its responses.

Proxy Support

The proxyName and proxyPort attributes can be used when Tomcat is run behind a proxy server. These attributes modify the values returned to web applications that call the request.getServerName() and request.getServerPort() methods, which are often used to construct absolute URLs for redirects. Without configuring these attributes, the values returned would reflect the server name and port on which the connection from the proxy server was received, rather than the server name and port to whom the client directed the original request.

For more information, see the Proxy Support HOW-TO.

SSL Support

You can enable SSL support for a particular instance of this Connector by setting the SSLEnabled attribute to true.

You will also need to set the scheme and secure attributes to the values https and true respectively, to pass correct information to the servlets.

The NIO and NIO2 connectors use either the JSSE Java SSL implementation or an OpenSSL implementation, whereas the APR/native connector uses OpenSSL only. Prior to Tomcat 9, different configuration attributes were used for JSSE and OpenSSL. From Tomcat 9 onwards, and as far as possible, common configuration attributes are used for both JSSE and OpenSSL. Also if using the JSSE OpenSSL implementation, configuration can be set using either the JSSE or APR attributes (note: but not both types within the same configuration). This is to aid simpler switching between connector implementations for SSL connectors.

Each secure connector must define at least one SSLHostConfig. The names of the SSLHostConfig elements must be unique and one of them must match the sslDefaultHost attribute of the Connector.

Each SSLHostConfig must in turn define at least one Certificate. The types of the Certificates must be unique.

As of Tomcat 9, the majority of the SSL configuration attributes in the Connector are deprecated. If specified, they will be used to configure a SSLHostConfig and Certificate for the sslDefaultHost. Note that if an explicit SSLHostConfig element also exists for the sslDefaultHost then that will be treated as a configuration error. It is expected that Tomcat 10 will drop support for the SSL configuration attributes in the Connector.

For more information, see the SSL Configuration HOW-TO.

SSL Support - SSLHostConfig

Attribute Description
certificateRevocationFile

Name of the file that contains the concatenated certificate revocation lists for the certificate authorities. The format is PEM-encoded. If not defined, client certificates will not be checked against a certificate revocation list (unless an OpenSSL based connector is used and certificateRevocationPath is defined). Relative paths will be resolved against $CATALINA_BASE. JSSE based connectors may also specify a URL for this attribute.

certificateRevocationPath

OpenSSL only.

Name of the directory that contains the certificate revocation lists for the certificate authorities. The format is PEM-encoded. Relative paths will be resolved against $CATALINA_BASE.

certificateVerification

Set to required if you want the SSL stack to require a valid certificate chain from the client before accepting a connection. Set to optional if you want the SSL stack to request a client Certificate, but not fail if one isn't presented. Set to optionalNoCA if you want client certificates to be optional and you don't want Tomcat to check them against the list of trusted CAs. If the TLS provider doesn't support this option (OpenSSL does, JSSE does not) it is treated as if optional was specified. A none value (which is the default) will not require a certificate chain unless the client requests a resource protected by a security constraint that uses CLIENT-CERT authentication.

certificateVerificationDepth

The maximum number of intermediate certificates that will be allowed when validating client certificates. If not specified, the default value of 10 will be used.

caCertificateFile

OpenSSL only.

Name of the file that contains the concatenated certificates for the trusted certificate authorities. The format is PEM-encoded.

caCertificatePath

OpenSSL only.

Name of the directory that contains the certificates for the trusted certificate authorities. The format is PEM-encoded.

ciphers

The ciphers to enable using the OpenSSL syntax. (See the OpenSSL documentation for the list of ciphers supported and the syntax). Alternatively, a comma separated list of ciphers using the standard OpenSSL cipher names or the standard JSSE cipher names may be used.

When converting from OpenSSL syntax to JSSE ciphers for JSSE based connectors, the behaviour of the OpenSSL syntax parsing is kept aligned with the behaviour of the OpenSSL 1.1.0 development branch.

Only the ciphers that are supported by the SSL implementation will be used.

If not specified, a default (using the OpenSSL notation) of HIGH:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!kRSA will be used.

Note that, by default, the order in which ciphers are defined is treated as an order of preference. See honorCipherOrder.

disableCompression

OpenSSL only.

Configures if compression is disabled. The default is true. If the OpenSSL version used does not support disabling compression then the default for that OpenSSL version will be used.

disableSessionTickets

OpenSSL only.

Disables use of TLS Session Tickets (RFC 4507) if set to true. Default is false.

honorCipherOrder

Set to true to enforce the server's cipher order (from the ciphers setting) instead of allowing the client to choose the cipher. The default is true.

hostName

The name of the SSL Host. This should either be the fully qualified domain name (e.g. tomcat.apache.org) or a wild card domain name (e.g. *.apache.org). If not specified, the default value of _default_ will be used.

insecureRenegotiation

OpenSSL only.

Configures if insecure renegotiation is allowed. The default is false. If the OpenSSL version used does not support configuring if insecure renegotiation is allowed then the default for that OpenSSL version will be used.

keyManagerAlgorithm

JSSE only.

The KeyManager algorithm to be used. This defaults to KeyManagerFactory.getDefaultAlgorithm() which returns SunX509 for Sun JVMs. IBM JVMs return IbmX509. For other vendors, consult the JVM documentation for the default value.

protocols

The names of the protocols to support when communicating with clients. This should be a list of any combination of the following:

  • SSLv2Hello
  • SSLv2
  • SSLv3
  • TLSv1
  • TLSv1.1
  • TLSv1.2
  • all

Each token in the list can be prefixed with a plus sign ("+") or a minus sign ("-"). A plus sign adds the protocol, a minus sign removes it form the current list. The list is built starting from an empty list.

The token all is an alias for SSLv2Hello,TLSv1,TLSv1.1,TLSv1.2.

Note that SSLv2Hello will be ignored for OpenSSL based secure connectors. If more than one protocol is specified for an OpenSSL based secure connector it will always support SSLv2Hello. If a single protocol is specified it will not support SSLv2Hello.

Note that SSLv2 and SSLv3 are inherently unsafe.

If not specified, the default value of all will be used.

sessionCacheSize

JSSE only.

The number of SSL sessions to maintain in the session cache. Use 0 to specify an unlimited cache size. If not specified, a default of 0 is used.

sessionTimeout

JSSE only.

The time, in seconds, after the creation of an SSL session that it will timeout. Use 0 to specify an unlimited timeout. If not specified, a default of 86400 (24 hours) is used.

sslProtocol

JSSE only.

The SSL protocol(s) to use (a single value may enable multiple protocols - see the JVM documentation for details). If not specified, the default is TLS. The permitted values may be obtained from the JVM documentation for the allowed values for algorithm when creating an SSLContext instance e.g. Oracle Java 7. Note: There is overlap between this attribute and protocols.

trustManagerClassName

JSSE only.

The name of a custom trust manager class to use to validate client certificates. The class must have a zero argument constructor and must also implement javax.net.ssl.X509TrustManager. If this attribute is set, the trust store attributes may be ignored.

truststoreAlgorithm

JSSE only.

The algorithm to use for truststore. If not specified, the default value returned by javax.net.ssl.TrustManagerFactory.getDefaultAlgorithm() is used.

truststoreFile

JSSE only.

The trust store file to use to validate client certificates. The default is the value of the javax.net.ssl.trustStore system property. If neither this attribute nor the default system property is set, no trust store will be configured. Relative paths will be resolved against $CATALINA_BASE. A URL may also be used for this attribute.

truststorePass

JSSE only.

The password to access the trust store. The default is the value of the javax.net.ssl.trustStorePassword system property. If that property is null, no trust store password will be configured. If an invalid trust store password is specified, a warning will be logged and an attempt will be made to access the trust store without a password which will skip validation of the trust store contents.

truststoreProvider

JSSE only.

The name of the truststore provider to be used for the server certificate. The default is the value of the javax.net.ssl.trustStoreProvider system property. If that property is null, the value of keystoreProvider is used as the default. If neither this attribute, the default system property nor keystoreProvideris set, the list of registered providers is traversed in preference order and the first provider that supports the truststoreType is used.

truststoreType

JSSE only.

The type of key store used for the trust store. The default is the value of the javax.net.ssl.trustStoreType system property. If that property is null, the value of keystoreType is used as the default.

SSL Support - Certificate

Attribute Description
certificateFile

OpenSSL only.

Name of the file that contains the server certificate. The format is PEM-encoded. Relative paths will be resolved against $CATALINA_BASE.

In addition to the certificate, the file can also contain as optional elements DH parameters and/or an EC curve name for ephemeral keys, as generated by openssl dhparam and openssl ecparam, respectively. The output of the respective OpenSSL command can simply be concatenated to the certificate file.

certificateChainFile

OpenSSL only.

Name of the file that contains the certificate chain associated with the server certificate used. The format is PEM-encoded. Relative paths will be resolved against $CATALINA_BASE.

The certificate chain used for Tomcat should not include the server certificate as its first element.

Note that when using more than one certificate for different types, they all must use the same certificate chain.

certificateKeyAlias

JSSE only.

The alias used for the server key and certificate in the keystore. If not specified, the first key read from the keystore will be used. The order in which keys are read from the keystore is implementation dependent. It may not be the case that keys are read from the keystore in the same order as they were added. If more than one key is present in the keystore it is strongly recommended that a keyAlias is configured to ensure that the correct key is used.

certificateKeyFile

OpenSSL only.

Name of the file that contains the server private key. The format is PEM-encoded. The default value is the value of certificateFile and in this case both certificate and private key have to be in this file (NOT RECOMMENDED). Relative paths will be resolved against $CATALINA_BASE.

certificateKeyPassword

The password used to access the private key associated with the server certificate from the specified file.

If not specified, the default behaviour for JSSE is to use the certificateKeystorePassword. For OpenSSL the default behaviour is not to use a password.

certificateKeystoreFile

JSSE only.

The pathname of the keystore file where you have stored the server certificate and key to be loaded. By default, the pathname is the file .keystore in the operating system home directory of the user that is running Tomcat. If your keystoreType doesn't need a file use "" (empty string) or NONE for this parameter. Relative paths will be resolved against $CATALINA_BASE. A URL may also be used for this attribute.

certificateKeystorePassword

JSSE only.

The password to use to access the keystore containing the server's private key and certificate. If not specified, a default of changeit will be used.

certificateKeystoreProvider

JSSE only.

The name of the keystore provider to be used for the server certificate. If not specified, the value of the system property javax.net.ssl.keyStoreProvider is used. If neither this attribute nor the system property are set, the list of registered providers is traversed in preference order and the first provider that supports the keystoreType is used.

certificateKeystoreType

JSSE only.

The type of keystore file to be used for the server certificate. If not specified, the value of the system property javax.net.ssl.keyStoreType is used. If neither this attribute nor the system property are set, a default value of "JKS". is used.

type

The type of certificate. This is used to identify the ciphers that are compatible with the certificate. It must be one of UNDEFINED, RSA, DSS or EC. If only one Certificate is nested within a SSLHostConfig then this attribute is not required and will default to UNDEFINED. If multiple Certificates are nested within a SSLHostConfig then this attribute is required and each Certificate must have a unique type.

SSL Support - Connector - NIO and NIO2

When APR/native is enabled, the connectors will default to using OpenSSL through JSSE, which may be more optimized than the JSSE Java implementation depending on the processor being used, and can be complemented with many commercial accelerator components.

The following NIO and NIO2 SSL configuration attributes are not specific to a virtual host and, therefore, must be configured on the connector.

Attribute Description
sniParseLimit

In order to implement SNI support, Tomcat has to parse the first TLS message received on a new TLS connection (the client hello) to extract the requested server name. The message needs to be buffered so it can then be passed to the JSSE implementation for normal TLS processing. In theory, this first message could be very large although in practice it is typically a few hundred bytes. This attribute sets the maximum message size that Tomcat will buffer. If a message exceeds this size, the connection will be configured as if no server name was indicated by the client. If not specified a default of 65536 (64k) will be used.

sslImplementationName

The class name of the SSL implementation to use. If not specified and the tomcat-native library is not installed, the default of org.apache.tomcat.util.net.jsse.JSSEImplementation will be used which wraps JVM's default JSSE provider. Note that the JVM can be configured to use a different JSSE provider as the default. Tomcat also bundles a special SSL implementation for JSSE that is backed by OpenSSL. To enable it, the native library should be enabled as if intending to use the APR connector, and Tomcat will automatically enable it and the default value of this attribute becomes org.apache.tomcat.util.net.openssl.OpenSSLImplementation. In that case, the attributes from either from either JSSE and OpenSSL configuration styles can be used, as long as the two types are not mixed (for example, it is not allowed to define use of a Java keystore and specify a separate pem private key using the OpenSSL attribute).

SSL Support - Connector - NIO and NIO2 (deprecated)

The following NIO and NIO2 SSL configuration attributes have been deprecated in favor of the default SSLHostConfig element.

Attribute Description
algorithm

This is an alias for the keyManagerAlgorithm attribute of the default SSLHostConfig element.

ciphers

This is an alias for the ciphers attribute of the default SSLHostConfig element.

clientAuth

This is an alias for the certificateValidation attribute of the default SSLHostConfig element.

crlFile

This is an alias for the certificateRevocationFile attribute of the default SSLHostConfig element.

keyAlias

This is an alias for the certificateKeyAlias attribute of the first Certificate element nested in the default SSLHostConfig element.

keyPass

This is an alias for the certificateKeyPassword attribute of the first Certificate element nested in the default SSLHostConfig element.

keystoreFile

This is an alias for the certificateKeystoreFile attribute of the first Certificate element nested in the default SSLHostConfig element.

keystorePass

This is an alias for the certificateKeystorePassword attribute of the first Certificate element nested in the default SSLHostConfig element.

keystoreProvider

This is an alias for the certificateKeystoreProvider attribute of the first Certificate element nested in the default SSLHostConfig element.

keystoreType

This is an alias for the certificateKeystoreType attribute of the first Certificate element nested in the default SSLHostConfig element.

sessionCacheSize

This is an alias for the sessionCacheSize attribute of the default SSLHostConfig element.

sessionTimeout

This is an alias for the sessionTimeout attribute of the default SSLHostConfig element.

sslEnabledProtocols

This is an alias for the protocols attribute of the default SSLHostConfig element.

sslProtocol

This is an alias for the sslProtocol attribute of the default SSLHostConfig element.

trustManagerClassName

This is an alias for the trustManagerClassName attribute of the default SSLHostConfig element.

trustMaxCertLength

This is an alias for the certificateVerificationDepth attribute of the default SSLHostConfig element.

truststoreAlgorithm

This is an alias for the truststoreAlgorithm attribute of the default SSLHostConfig element.

truststoreFile

This is an alias for the truststoreFile attribute of the default SSLHostConfig element.

truststorePass

This is an alias for the truststorePass attribute of the default SSLHostConfig element.

truststoreProvider

This is an alias for the truststoreProvider attribute of the default SSLHostConfig element.

truststoreType

This is an alias for the truststoreType attribute of the default SSLHostConfig element.

useServerCipherSuitesOrder

This is an alias for the honorCipherOrder attribute of the default SSLHostConfig element.

SSL Support - Connector - APR/Native (deprecated)

When APR/native is enabled, the HTTPS connector will use a socket poller for keep-alive, increasing scalability of the server. It also uses OpenSSL, which may be more optimized than JSSE depending on the processor being used, and can be complemented with many commercial accelerator components. Unlike the HTTP connector, the HTTPS connector cannot use sendfile to optimize static file processing.

The HTTPS APR/native connector has the same attributes than the HTTP APR/native connector, but adds OpenSSL specific ones. For the full details on using OpenSSL, please refer to OpenSSL documentations and the many books available for it (see the Official OpenSSL website). The SSL specific attributes for the APR/native connector are:

Attribute Description
SSLCACertificateFile

This is an alias for the caCertificateFile attribute of the default SSLHostConfig element.

SSLCACertificatePath

This is an alias for the caCertificatePath attribute of the default SSLHostConfig element.

SSLCARevocationFile

This is an alias for the certificateRevocationFile attribute of the default SSLHostConfig element.

SSLCARevocationPath

This is an alias for the certificateRevocationPath attribute of the default SSLHostConfig element.

SSLCertificateFile

This is an alias for the certificateFile attribute of the first Certificate element nested in the default SSLHostConfig element.

SSLCertificateKeyFile

This is an alias for the certificateKeyFile attribute of the first Certificate element nested in the default SSLHostConfig element.

SSLCipherSuite

This is an alias for the ciphers attribute of the default SSLHostConfig element.

SSLDisableCompression

This is an alias for the disableCompression attribute of the default SSLHostConfig element.

SSLHonorCipherOrder

This is an alias for the honorCipherOrder attribute of the default SSLHostConfig element.

SSLPassword

This is an alias for the certificateKeyPassword attribute of the first Certificate element nested in the default SSLHostConfig element.

SSLProtocol

This is an alias for the protocols attribute of the default SSLHostConfig element.

SSLVerifyClient

This is an alias for the certificateValidation attribute of the default SSLHostConfig element.

SSLVerifyDepth

This is an alias for the certificateVerificationDepth attribute of the default SSLHostConfig element.

SSLDisableSessionTickets

This is an alias for the disableSessionTickets attribute of the default SSLHostConfig element.

Connector Comparison

Below is a small chart that shows how the connectors differ.

Java Nio Connector
NIO
Java Nio2 Connector
NIO2
APR/native Connector
APR
Classname Http11NioProtocol Http11Nio2Protocol Http11AprProtocol
Tomcat Version 6.x onwards 8.x onwards 5.5.x onwards
Support Polling YES YES YES
Polling Size maxConnections maxConnections maxConnections
Read HTTP Request Non Blocking Non Blocking Non Blocking
Read HTTP Body Blocking Blocking Blocking
Write HTTP Response Blocking Blocking Blocking
Wait for next Request Non Blocking Non Blocking Non Blocking
SSL Support Java SSL or OpenSSL Java SSL or OpenSSL OpenSSL
SSL Handshake Non blocking Non blocking Blocking
Max Connections maxConnections maxConnections maxConnections

Comments

Notice: This comments section collects your suggestions on improving documentation for Apache Tomcat.

If you have trouble and need help, read Find Help page and ask your question on the tomcat-users mailing list. Do not ask such questions here. This is not a Q&A section.

The Apache Comments System is explained here. Comments may be removed by our moderators if they are either implemented or considered invalid/off-topic.